JIMS MACHINING

Weight (lbs): 0.00 Incorrect piston pin clip removal can damage the piston and incorrect installation can damage the clip. Damaged clips can come out during engine operation causing catastrophic...

Weight (lbs): 3.52 Safely install a new bearing using hand tools Job can be performed with the transmission still in the frame Holds bearing square to its bore, eliminating any marring of the bearing...

Weight (lbs): 2.68 This tool easily installs the bearing to the proper depth and alignment without damaging the bearing. Jims Fits: Harley all Big Twin 1958-Later (except Twin Cam) By: JIMS MACHINING

Weight (lbs): 2.11 Ever try to remove a cam bearing from a Big Twin gear case without splitting the case and have a needle bearing roller fall into the cases? That will never happen with this high...

Weight (lbs): 1.14 Used to line ream and finish fit gear cover cam bushing This tool pilots off of the cam bearing for a true centerline. A must have tool to do a professional job Jims Fits: Harley...

Weight (lbs): 6.012 The Milwaukee-Eight engine returns to the single camshaft design, which requires a new tool for correct and accurate replacement of the camshaft inner needle bearing. Compared to...

Weight (lbs): 2.89 Steel clutch spring compressor is a necessity any time the clutch is removed or replaced Clutch springs are under extreme pressure and very dangerous if not used with the proper...

Weight (lbs): 0.00 Peace of mind is key when it comes to building a high performance powertrain. The Compensating Sprocket Lock Kit is now ready and available for select Harley-Davidson motorcycles...

Weight (lbs): 7.04 Easily removes crankshaft assembly from left case on Big Twin models This tool will also separate case halves that have tight sealant bond Includes instructions Jims Fits: Harley...

Weight: 8.59 Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminum cylinders. They...

Weight (lbs): 0.00 It's common knowledge that heat is one of an angine's worst enemies.  In developing the JIMS cylinder head cooler, JIMS had to sacrifice a few motors for the cause.  We tested...

Weight: 0.00 Harley-Davidson recently updated the fork cap on touring bikes and you now need a large allen head socket for disassembly. There's a good chance you don't have this size in your tool box...