Drivetrain

Weight (lbs): 0.70 Remove the cam seal without removing the cam cover Mount the tool, screw in the removal Screws Pack of 10, rotate the center and out pops the seal Presses seal in square and flat for a no leak fit Simplifies cam cover removal from the...

Weight (lbs): 1.96 Gauge is used to set and align shift forks Jims For Big Twin 4 speed Late 1979-Later Replaces HD# 96385-78A By: JIMS MACHINING

Weight (lbs): 0.75 Used to install spiral lock rings like 65102 . Used on OEM or aftermarket pistons with a .515" I.D. wrist pin, this tool installs the lock ring in one easy step without distorting the ring and allowing the safest wrist pin retention...

Weight (lbs): 8.24 Manufactured from die cast aluminum See below for availability of finishes On late models, partially drilled 9th hole must be completely drilled prior to installation See the drive train section for primary cover mounting hardware,...

Weight (lbs): 1.16 With this tool one person can easily remove the connecting rods wrist pin from the piston with no fear of damage to the wrist pin bushing, connecting rod or the piston. Jims Fits: Harley all models, all years Replaces HD# 42320 By:...

Weight (lbs): 1.51 Used to remove and install wrist pin bushings without removing rods from crankcase on all Harley-Davidson ® models (except Twin Cam). Includes a thrust bearing for smooth tool operation. Jims For all Harley-Davidson ® models (except...

Weight (lbs): 1.87 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission...

Weight (lbs): 0.86 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley...

Weight (lbs): 0.83 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley...

Weight (lbs): 0.87 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in conjunction with the standard width 32 tooth transmission pulley...

Weight (lbs): 1.21 Features a 7-16" tapered design that is made from chromoly steel and much stiffer than OEM pushrods Provides maximum lift and dynamic stability when running performance camshafts Fully adjustable. Can be installed without the need to...

Weight (lbs): 1.88 Carbon fiber reinforced belt 33% more tensile strength than conventional aramid-reinforced belts High temperature rubber compounded belt provides excellent flex and service life Features a patented fabric-reinforced tooth surface that...