8mm Bolt-In Enclosed Primary Belt Drive Kit With Clutch Fits Harley Softail & Dyna 5 speed models 1994-06 #EVBB-2SL

Weight: 18.97lb

• Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited.
• Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque.
• The inner stress proof steel hub is designed to move the weight of the clutch basket inward over the main shaft 1" which distributes the weight more evenly on the main shaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar ® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar ® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028 ). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. For replacement parts, see the drive train section for clutch or starter ring gear. Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.
• Note: No modification is required to the inner primary for installation. Belt Drives Ltd. 1 & 5 / 8 " Hardbody Wide Belt Drive Kit with Clutch
• Made by: BELT DRIVES LTD

• Direct bolt-in applications
• 1 5/8 in. kits include front pulley, belt, clutch hub, clutch basket and clutch set (consists of two half plates, four full plates and five steel drive plates)
• 3 in. electric start kits include front pulley, belt, clutch hub and clutch basket and clutch set (consists of two half plates, four full plates and five steel drive plates), 6061 T-6 billet motor plate, outside guard and polished pulley cover
• All systems come with the Quiet Clutch and ball-bearing lockup design pressure plate
• Lockup design applies extra pressure to the clutch plates for positive engagement with no clutch slippage
• No increase in lever pull effort
• Rear pulley has a 40mm, double-row bearing with an inner stress-proof steel clutch hub to support the clutch
• Replacement components available separately
• Made in the USA
  
  NOTES:
  3 in. systems are not designed for use with floorboards.
  
  Not for use with offset primaries.
  
  Included Items:
  (1) Clutch assembly
  (1) Pulley

Fits: Harley Softail & Dyna 5 speed models 1994-2006 with spline clutch hub, 45-68 tooth combo * Includes the earlier style heavy duty 66 tooth starter ring gear and a matching 9 tooth starter pinion gear